Product Information


Product Image X-ON

Multiple Function Sensor Development Tools Predictive maintenance kit with sensors and IO-Link capability

Manufacturer: STMicroelectronics
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges

Price (JPY)

1: ¥ 19756.7667 ea
Line Total: ¥ 19756.7667

0 - Global Stock
MOQ: 1  Multiples: 1
Pack Size: 1
Availability Price Quantity
0 - Global Stock

Ships to you between Tue. 20 Jun to Thu. 22 Jun

MOQ : 1
Multiples : 1

Stock Image


1 : ¥ 19756.7667

0 - Global Stock

Ships to you between Wed. 14 Jun to Tue. 20 Jun

MOQ : 1
Multiples : 1

Stock Image


1 : ¥ 34791.3575

Product Category
Multiple Function Sensor Development Tools
Tool Is For Evaluation Of
Hts221, Ism330dlc, Lps22hb, Mp34dt05 - A
Development Kits
Accelerometer, Environmental, Acoustic Mems Sensor
Operating Supply Voltage
18 v to 32 V
Steval - Bfa001v1b
Product Type
Multiple Function Sensor Development Tools
Development Tools
Show Stocked Products With Similar Attributes. LoadingGif
Image Description
Stock Image STEVAL-CBL001V1
ST7LNB Microcontroller Board
Stock : 0
Stock Image STEVAL-CBL009V1
STMicroelectronics Power Management IC Development Tools DiSEqC 1.X LNBH25 22kHz CTRL Board
Stock : 2
Stock Image STEVAL-CBL007V1
Power Management IC Development Tools LNB Power Supply Demo BRD LNBH23L
Stock : 0
Stock Image STEVAL-CBL005V1
Power Management IC Development Tools LNB Power Supply 8 to 15V 22kHz BRD
Stock : 0
Stock Image STEVAL-CBL004V1
Power Management IC Development Tools BOARD & REF DESIGN
Stock : 2
Stock Image STEVAL-CBL003V1
Power Management IC Development Tools POWER SUPPLY LNB BASED ON LNBH23
Stock : 11
Stock Image STEVAL-CBL006V1
LNBH24 - Special Purpose DC/DC, LNB 2, Non-Isolated Outputs Evaluation Board
Stock : 3
Bluetooth Development Tools (802.15.1) Ultra-low power Bluetooth low energy microphone based on SPBTLE-1S certified module
Stock : 0
Stock Image STEVAL-BTDP2
Bluetooth Development Tools (802.15.1)
Stock : 0
Stock Image STEVAL-BTDP1
Bluetooth Development Tools (802.15.1)
Stock : 6
Image Description
Stock Image CIP-01

Multiple Function Sensor Development Tools CiP-1
Stock : 0

Stock Image AGAS-01

Multiple Function Sensor Development Tools MQ-3 Alcohol Gas Sensor Module
Stock : 0

Stock Image SOUND-01

Multiple Function Sensor Development Tools Sound Sensor Module
Stock : 42

Stock Image 3686

Multiple Function Sensor Development Tools PM2.5 Air Quality Sensor and Breadboard Adapter Kit - PMS5003
Stock : 172

Stock Image SENS-01

Multiple Function Sensor Development Tools 101 Sensor Basics Starter Kit
Stock : 0

Stock Image KIT-14820

Distance Sensor Development Tool SparkFun Arduino Qwiic Kit
Stock : 4

Stock Image BHI160 Shuttle Board

Position Sensor Development Tools BHI160 Shuttle Board
Stock : 0

Stock Image 3709

Multiple Function Sensor Development Tools Adafruit SGP30 Air Quality Sensor Breakout - VOC and eCO2 - STEMMA QT / Qwiic
Stock : 254

Stock Image BNO055 USB Stick

Position Sensor Development Tools BNO055 USB-STICK
Stock : 0

Stock Image 984

Distance Sensor Development Tool Ultrasonic HRLV-EZ1 Rangefinder
Stock : 2

STEVAL-BFA001V1B Data brief Predictive maintenance kit with sensors and IO-Link capability Features Compact solution for condition monitoring and predictive maintenance based on 3D digital accelerometer, environmental and acoustic MEMS sensors Main supply voltage: 18 V - 32 V Main components: 32-bit ARM Cortex -M4 core for signal processing and analysis (STM32F469AI) iNEMO 6DoF (ISM330DLC) Absolute digital pressure sensor (LPS22HB) Relative humidity and temperature sensors (HTS221) Digital microphone sensors (MP34DT05-A) IO-Link PHY device (L6362A) EEPROM (M95M01-DF) for data storage Step-down switching regulator and LDO regulator (L6984 and LDK220) Complete set of firmware demo examples based on 3D accelerometer library with advanced frequency and time domain signal processing for predictive maintenance, including: Programmable FFT size (512, 1024, 2048) Programmable FFT averaging Programmable overlapping Programmable windowing (Flat Top, Hanning, Hamming) Product summary Speed RMS moving average, acceleration max. peak Capacitive digital sensor for relative Programmable threshold for warning and alarm conditions in spectral band humidity and temperature HTS221 Microphone algorithms for: iNEMO 6DoF inertial module for Industrial PDM to PCM Applications. Ultra-low power and high accuracy ISM330DLC Sound pressure Audio FFT Ultra-compact piezoresistive absolute pressure sensor, 260-1260 hPa, digital IO-Link PHY using the L6362A Device transceiver for data communication with output barometer, full-mold, holed LGA host unit package (HLGA) LPS22HB M12 industrial connector 1-Mbit SPI bus EEPROM with high-speed SWD connector for debugging and programming capability clock M95M01-DF Reset button MEMS audio sensor omnidirectional Expansion connector with GPIO, ADC, I2C bus digital microphone, 64 dB SNR, -26 dBFS Designed to meet IEC industrial standard requirements sensitivity, top-port, 122.5 dBSPL AOP MP34DT05-A WEEE compliant High-performance advanced line, ARM RoHS compliant Cortex-M4 core with DSP and FPU, 2 Mbytes Flash, 384+4 kB of RAM, DMA controller, up to 17 timers STM32F469AI Description IO-Link communication transceiver device The STEVAL-BFA001V1B is an industrial reference design kit designed for condition L6362A monitoring (CM) and predictive maintenance (PdM). The hardware development kit consists of an industrial sensor board (STEVAL- IDP005V1), an adapter for the ST-LINK/V2-1 programming and debugging tool DB3663 - Rev 2 - January 2019 For further information contact your local STMicroelectronics sales office.STEVAL-BFA001V1B (STEVAL-UKI001V1), a 0.050 10-pin flat cable, a 4-pole cable mount connector plug with male contacts and an M12 female connector with a 2 m cable. The firmware package includes dedicated algorithms for advanced time and frequency domain signal processing and analysis of the 3D digital accelerometer with 3 kHz flat bandwidth. The package includes drivers for pressure, relative humidity and temperature sensor monitoring. Audio algorithms for acoustic emission (AE) are also part of the package. The firmware runs on the high performance STM32F469AI, ARM Cortex -M4, 32- bit microcontroller and the sensor data analysis results are sent via wired connectivity based on IO-Link device transceiver (IO-Link stack protocol not included). The STEVAL-BFA001V1B reference design is suitable for monitoring motors, pumps and fans, and can accelerate the development of predictive maintenance solutions. The package also allows connection with the STEVAL-IDP004V1 IO-Link master capable, multi-port evaluation board a PC GUI included in the package displays the algorithms output and sensor data. The data can also be displayed on a PC using a common terminal emulator by simply connecting the STEVAL-IDP005V1 to a PC through the STEVAL-UKI001V1 adapter and ST-LINK/V2-1 included on any STM32 Nucleo-64 development board. The package includes an industrial M12 cable for power or connection with a master port. The connection is managed using a standard multipolar cable with one wire used for IO-Link data, one for the L+ line (positive supply voltage pole) and one for the L- line (negative supply voltage pole). The layout is designed to meet IEC61000-4-2/4 and EN60947 requirements for industrial applications. The STEVAL-IDP005V1 is specifically designed with dimensions (50mm x 9mm x 9mm) that reflect real industrial applications and needs. The firmware is freely available on STSW-BFA001V1. DB3663 - Rev 2 page 2/12

Tariff Desc

8543.70.00 - Other machines and apparatus Free
13 No Signal processors (graphic equalisers, crossovers etc.)
91 .. Other

9027.10.00 Instruments and apparatus for physical or chemical analysis (for example, polarimeters, refractometers, spectrometers, gas or smoke analysis apparatus); instruments and apparatus for measuring or checking viscosity, porosity, expansion, surface tension or the like; instruments and apparatus for measuring or checking quantities of heat, sound or light (including exposure meters); microtomes.
C-Max (VA)