OPB9001AC

Reflective Optical Sensor OPB9001 Series Features: Wide operating supply voltage range up to 3.3 V - 30 V Ability to drive the output up to 30 V Integrated drive circuitry Increased ESD up to 8 kV EMI immunity capability to EMC Directive 2014/30 -EU UL & CE approved Detecting distance 2.5 mm to 50 mm Ambient light rejection 25 klx+ Programmable output configuration and sensitivity level Integrated 4-pin connector for plug and play capability -40 C to +85 C operating temperature range Small footprint dimensions L 18 mm X W 12 mm X H 5 mm Description: The OPB9001 PCB module takes the versatile and programmable OPB9000 reflective sensor and enhances its capabilities by integrating multiple features into a robust, small form factor for ease of use. The OPB9001 accepts a wide range of supply voltages from 3.3 V to 30 V and comes with built-in voltage protection for maximum flexibility and protection. An integrated, industry standard 4-pin Molex connector provides ease of connection while the onboard LED indicators provide overall status during power-on, output and calibration. The OPB9001 is designed for portability in a variety of position and presence detect applications, with a small form factor (188 mm x 12 mm x 5 mm) to fit in even the smallest application spaces. The full-featured OPB9001AC includes a robust Transient Voltage Suppressor (TVS) diode to protect against harmful voltage spikes and is CE and UL certified for maximum reliability under any environmental condition. It is also capable of withstanding up to 8 kV of contact discharge HBM. Factory calibrated for a 12 mm distance and a white reflective surface the OPB9001 can be re -calibrated in a matter of milliseconds with a single command for specific application requirements. An interface cable can be purchased separately to calibrate the OPB9001 Series using the OPB9000-KIT. The product has been assessed to meet high safety, health, and environmental protection requirements as determined by CE and EMC directives, providing for increased ESD and EMI immunity. Note 1: For additional information on how to program OPB9000, see the datasheet: hptt s://www.ttelectronics.com/TTElectronics/media/ProductFiles/Optoelectronics/Datasheets/OPB9000.pdf Additional Features: Applications: 6us response time Non-contact position presence applications Wide operating supply voltage range Industrial printing and high -speed paper detection 4.5 V to 30 V (OPB9001A/AC) Manufacturing and Factory automation 4.5 V to 24 V (OPB9001B) Automated sewing machines 3.3 V to 5.5 V (OPB9001C) Automated banking machines Reverse voltage protection Medical equipment Single-command calibration with on -chip EPROM Automatic dispensing Temperature-compensated LED drive Material handling and asset tracking Eliminate the need for external drive circuitry General Note TT Electronics OPTEK Technology TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006 Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics own data and is www.ttelectronics.com sensors ttelectronics.com considered accurate at time of going to print. Rev B 10/2019 Page 1 TT electronics plc Form 500-1080-001 Rev - 06/2019 Reflective Optical Sensor OPB9001AC, OPB9001A, OPB9001B, OPB9001C Electrical Specifications Part Number Guide OPB9001 OPB9001 X VDD Voltage Range A - 4.5 V to 30 V OPB9001 Reectivfl e Assembly B - 4.5 V to 24 V C - 3.3 V to 5.5 V AC - 4.5 V to 30 V CE / UL Ordering Part Voltage Output VCC Range Features Number Configuration OPB9001AC N.O. NPN 4.5 V to 30 V OPB9000 with indicators, voltage regulator + NPN Transistor 30 V +ESD TVS diodes and CE and UL Certifications and connector OPB9001A N.O. NPN 4.5 V to 30 V OPB9000 with indicators, voltage regulator + NPN Transistor 30 V and connector OPB9001B N.O. NPN 4.5 V to 24 V OPB9000 with indicators, voltage regulator + NPN Transistor 24 V and connector OPB9001C TTL CMOS 3.3 V to 5.5 V OPB9000 with indicators and connector OPB90014CB N/A N/A 1m interface cable with connector OPB9000-KIT N/A N/A OPB9000 reflective sensor evaluation kit for tesngti and auto -calibration (requires OPB90014CB interface cable) General Note TT Electronics OPTEK Technology TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006 Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics own data and is www.ttelectronics.com sensors ttelectronics.com considered accurate at time of going to print. Rev B 10/2019 Page 2 TT electronics plc Form 500-1080-001 Rev - 06/2019